Product Type:XJ 6808
Framework: 304 Grade Stainless Steel
Specification: L1200*W300*H1000 (mm)
Arm length: 285(mm)
Interface: Standard port-RS485
Power voltage: AC220 (10%more or less) V, 50HZ
Drive voltage: 24V
Transit speed: 30??40persons per minute
Working Environment: Indoor/Outdoor (with a tent over)
Temperature: 10 below degree to 50 degree
With function of self-examine and alarms, it is convenient for users to maintain and use.
It will raise the alarm by means of a sound or light when someone pushes in illegally.
The mechanism is locked until a valid open signal is received.
Reset automatically--Go signal will be cancelled if passage through is not completed within pre-set time. The standard default is 5 seconds.
Unit can be adjusted permanent open or close when power off to meet different needs. Unit can be controlled and administered by remote control
Material of arms is optional
Indoor, outdoor(shade shed)
Temperature: -10?????? 50??
Relative Humidity: ??0%锛?no coagulation
It has malfunction self-check and alarm, convenient for users to use and maintenance.
The status of running of the device can be set by the small inner board in the main control board.
Anti-nip, anti bump, the motor can stop working automatically in setting time when the arm meet block during the process of restoration. Then restoration again after pretermission delay, and the force is very small.
Anti-rush, the arm can be locked when no signal of opening was received.
Swing arm synchronization
Automatic restoration, passenger do not pass after the arm open, the system would cancel his right of passing automatically.
Normal open or normal close can be set freely, in order to meet different requirements.